Carrier Access user manual Access Navigator Release August 18-163

CLI Language Reference

CLI Command List

The status performance message will include an asterisk (*) to mark error counts that exceed the threshold values set by the Set DS1 Threshold on page 18-115. Exceeding a threshold can cause an automatic alarm message to be sent to the network operations center.

Security: Level 3 (monitor)

Syntax: status ds1 <n> performance

Field

n

Description

DS1 number, 1 to 32, or a range of numbers such as 2-8.

Example: status ds1 9 performance

Message:

Performance Statistics for DS1 #9	current	previous
				day
15 min.		15 min.	hour
-------- --------			--------	--------
unavailable seconds:	0	0	0	0
errored seconds:	1	0	577*	29377*
severely errored seconds:	0	0	0	0
sev. errored frame seconds:	0	0	0	0
line errored seconds:	1	0	0	0
controlled slip seconds:	0	0	0	0
bursty errored seconds:	1	0	0	0
degraded minutes:	0	0	0	0
line code violations:	3	0	0	0
path code violations:	1	0	0	0
elapsed time in current 15 min. interval: 4:25
valid 15 min. intervals in hour:		3
valid 15 min. intervals in day:		35
* indicates threshold has been exceeded.

Description:

Item	Description
Unavailable Seconds	(UAS) The number of seconds that the interface is unavailable.
	The DS1 interface is said to be unavailable from the onset of 10
	contiguous SESs, or the onset of the condition leading to a
	failure.
	If the condition leading to the failure was immediately preceded
	by one or more contiguous SESs, then the DS1 interface
	unavailability starts from the onset of these SESs.

Access Navigator - Release 1.8 August 2003 18-163