Carrier Access Access Navigator user manual 14-12

Alarm Clearing

Clear Alarms – EOC

Table 14-6 EOC Minor Alarm Message and Trouble Clearing Procedure

Event Message	Description	Trouble Clearing Procedure
Remote Device #n:	Remote device on DS1 #n	Clear trouble at remote device.
T1 #x rx Yellow alarm	received Yellow alarm (RAI) on
	T1 #x. Minor alarm for active
	crossconnects.
Remote Device #n: V.35	Remote device on DS1 #n	Clear trouble at remote device.
loss of RTS	reported loss of RTS on V.35
	interface. Minor alarm for active
	crossconnects.
TMC Primary/	Event Report Service Problem.	Check status of DS1 assigned for
Secondary Link Down	TMC LAPD data link	TMC with the following CLI
	communication not established	command:
	with the switch. Access Navigator	status tmc
	periodically retries to establish	Check TMC provisioning with the
	LAPD data link with the switch.
	Ensure DS1 assigned to TMC is	following CLI command:
	healthy.	show tmc
		Use following CLI command to
		change setting:
		set tmc <primary/secondary> ds1
		<n>
System Alarm State	Event Report Service Problem	The alarm is cleared after all
Change	(5ESS only). The severity of the	events reportable to the switch
	system alarm state has changed.	have been cleared.
	Only those events reportable to the
	switch and excluding Service
	Problems are included in the
	system alarm state.

14-12 August 2003 Access Navigator - Release 1.8