Carrier Access Access Navigator Clear Bert Log, Clear Blocked Call Count, Clear Config Log

	CLI Language Reference
	CLI Command List
Item	Description
Severity	Severity of the event (major, minor, alert).
Description	Message describing the event.

Clear BERT Log

Purpose: Erases all data in the BERT log file, which records error counts.

Security: Level 3 (monitor)

Syntax: clear bert log

Clear Blocked Call Count

Purpose: Sets the blocked call count to zero (see Status TMC on page 18-173).

Security: Level 3 (monitor)

Syntax: clear blocked call count

Clear Config Log

Purpose: Erases all data in the configuration change log file, which records changes to the system configuration for each management interface.

Security: Level 3 (monitor)

Syntax: clear config log

Clear DS1 Performance

Purpose: Clears only the performance data for the specified Access Navigator DS1, setting all error counters back to zero. This command does not reset the interval timer, so that new errors will only be accumulated for the remainder of the “current” 15 minute interval. This may affect the totals shown for the “previous” 15 minute, 1 hour, and 1 day intervals. The interval timer is only reset by a power-on reset or reset all command.

Security: Level 3 (monitor)

Syntax: clear ds1 <n> performance

Field

n

Description

DS1 number, 1 to 32

Example: clear ds1 9 performance

Access Navigator - Release 1.8 August 2003 18-27