Carrier Access user manual Attach Access Navigator to Plywood

Physical Installation

Attach Access Navigator to Plywood

Attach Access Navigator to Plywood

1.Position Access Navigator with brackets attached over screw hole locations marked in plywood (see Figure 5-12 on page 5-20).

2.Secure mounting brackets to plywood using eight #8 × 3/4 inch panhead screws (see D in Figure 5-13 on page 5-21).

WARNING! IF ACCESS NAVIGATOR IS MOUNTED ON PLYWOOD, DO NOT USE A HAMMER TO ATTACH PLYWOOD TO WALL BECAUSE THE IMPACT SHOCK MAY DAMAGE THE ACCESS NAVIGATOR AND OTHER COMPONENTS MOUNTED ON THE PLYWOOD. A POWER DRILL AND SCREWDRIVER IS RECOMMENDED TO AVOID DAMAGE.

3. Attach plywood to wall using fasteners appropriate for heavy objects.

Access Navigator - Release 1.8 August 2003 5-17