Carrier Access Access Navigator user manual Perform Management Operations

Start Management Session

Perform Management Operations

2.If a “Login:” message similar to the following appears, enter you user name and press Enter or Return key. If a “Password:” message appears next, enter your password and press Enter or Return key.

Carrier Access Corporation Access Navigator

08:30:45 11/30/1998

Login:

3.If a message and command prompt similar to the following appears, you are successfully logged in to the Access Navigator.

Carrier Access Corporation Access Navigator

08:30:45 11/30/1998

Access Navigator>

Perform Management Operations

After logging on, perform whatever management operations are required by the installation, provisioning, or maintenance procedure. For detailed command descriptions, see CLI Language Reference on page 18-1.

Exit Telnet Management Session When Finished

NOTE: You will remain logged into the Access Navigator until you terminate the session by using the exit command. If you do not terminate the session before disconnecting for the Telnet server, the Access Navigator Telnet session will remain active for 2 hours. No other users will be able to log on if all Telnet sessions are active.

When you are finished with the management session, you must log out and exit from the Access Navigator by entering the following command:

exit

7-10 August 2003 Access Navigator - Release 1.8