Carrier Access Access Navigator user manual Status TMC History, Syntax status tmc allintervalrange

CLI Language Reference

CLI Command List

Status TMC History

Purpose: Displays TMC call history for the last specified 1-hour interval, range of intervals, or all intervals (48 hours). The resulting messages are similar to the following. (For current status information, see Status TMC on page 18-173.)

Security: Level 3 (monitor)

Syntax: status tmc <allintervalrange>

Field

all

interval

range

Description

Shows all TMC statistics for the last 48 hourly intervals.

Shows TMC statistics for the specified hourly interval, 1 to 48.

Shows TMC statistics for a range of intervals, such as 8-12.

Example: status tmc all

Example: status tmc 8-12

Message:

TMC Calls	History	time	permn.	blocked	peak	switch ports/
int#	date
-----	----------	--------	calls	calls	calls	percent used
			--------	--------	--------	-------------
8	04/17/2000	11:48:47	0	0	37	140	/ 26
9	04/17/2000	10:48:47	0	0	85	140	/ 61
10	04/17/2000	09:48:47	0	17	140	140	/ 100
11	04/17/2000	08:48:47	0	0	118	140	/ 84
12	no data for	this interval.

Description:

Item	Description
int#	One-hour intervals, numbered from 1 to 48.
Date	month/day/year
Time	24-hour clock in hours:minutes:seconds
Permanent Calls	Number of calls currently set in a permanent off-hook state. This
	state will be cleared when an on-hook is observed for more than
	400 milliseconds. (Permanent calls can also be cleared as
	described in “Set CRV Idle” on page 18-97.)
Blocked Calls	Number of calls blocked by Access Navigator or switch. (To
	clear, see “Clear Peak Call Count” on page 18-28.)Switch may
	also refuse call if line configuration is not correct. Blocking can
	occur because:
	• Switch side DS0s are not available for call request.
	• Switch is not configured for call request from CRV.

Access Navigator - Release 1.8 August 2003 18-175