Carrier Access Access Navigator user manual Tools and Materials Required

Electrical Installation

Tools and Materials Required

7.Always store circuit cards in an anti-static storage bag. Whenever possible, use the same storage bag the card or replacement card came in.

8.If a circuit card is to be returned to the factory, always ship the circuit card inside an anti-static storage bag.

Tools and Materials Required

Electrical installation requires the following tools and materials.

•Screwdrivers, Phillips #2 and #3

•Screwdrivers, slotted

•Pliers, needle nose

•Cutters, diagonal

•Wire stripper, 16-26 AWG

•Wire wrap tool, bits for 22, 24, 26 AWG

•Wire unwrap tool

•Wire ties

•Grounding wrist strap

•Continuity tester

•Volt-ohm meter

•Shielded RS-232 cable: DTE-to-DCE for direct connection to a computer or a DCE-to-DCE (null modem cable) for connection to a modem (see RS-232 Management Connection on page 6-17)

•Shielded DSX-1 cables (2 ea.), PN 005-0025 (10 ft.) or 005-0030 (25 ft.), or equivalent

NOTE: ABAM shielded cable is recommended for extending DSX-1 connections.

6-4 August 2003 Access Navigator - Release 1.8