Carrier Access Access Navigator Set DS1 Remote Device Mgmt, Example set ds1, Mgmt ds1, Mgmt caip

CLI Language Reference

CLI Command List

Set DS1 Remote Device Mgmt

Purpose: Sets the remote device management type for the management channel.

NOTE: CA FDL management requires a Type 2 T1 line with ESF framing and FDL capability. If FDL facilities are not available, CA IP management can be used instead to send IP packet data over a DS0 channel in the drop DS1.

NOTE: When remote device management is enabled (any setting except none), the DS1 FDL protocol must be set to none. See Set DS1 FDL on page 18-106.

NOTE: The Access Navigator only supports P-Phone service between a remote Adit 600 terminal and a Nortel DMS switch (see Set Switch Type on page 18-131). The Access Navigator must be configured for Carrier Access IP management (CAIP) with P-Phone service (pphone) enabled so that the IP DS0 channel can also carry P-Phone management data.

Security: Level 2 (operator)

Syntax: set ds1 <n> remote device mgmt <cafdlcaip ipaddrds1 nnone>

Syntax: set ds1 <n> remote device mgmt caip ipaddr pphone

Field	Description
n	DS1 number, 1 to 32, or a range of numbers such as 2-8.
cafdl	Set to Carrier Access FDL management channel.
caip ipaddr	Set to Carrier Access IP DS0 management channel.
	ipaddr is the IP address of the remote device in the form
	xxx.xxx.xxx.xxx, where xxx is a number from 0 and 255.
ds1 n	Set remote device DS1 to point to the management DS1.
	There can be only one management DS1 on a remote device, so
	all other DS1s must be set to point to the management DS1.
none	Turn off Carrier Access remote management.
pphone	Enables P-Phone management channel to a remote Adit 600.
	Note: The Access Navigator must also be conected to a Nortel
	DMS switch (see Set Switch Type on page 18-131).

Example: set ds1 10 remote device		mgmt cafdl
This will affect 'remote		device management' for a remote
device using CAIP.
Are you sure you want to change the management type (y/n)?
Example: set ds1 11	remote device	mgmt ds1 10
Example: set ds1 13	remote device	mgmt caip 192.168.3.158
Example: set ds1 14	remote device	mgmt caip 192.168.3.159 pphone

Access Navigator - Release 1.8 August 2003 18-113