Carrier Access Access Navigator user manual Example send ds1 9 payload f1in8 test

CLI Language Reference

CLI Command List

Example: send ds1 9 payload f1in8 test

For the 1-in-8 and all-zeros patterns, the CLI will provide a progress message indicating the success (ok) or failure of the command, followed by a pattern detection message for each second of the test.

Message: Waiting for pattern sync........ok.

Testing line...

08:18:23	Pattern Not Present
08:18:24	Pattern Present
08:18:25	Pattern Present
08:18:26	Pattern Present
08:18:27	Pattern Present
08:18:28	Pattern Present
08:18:29	Pattern Present
08:18:30	Pattern Present
08:18:31	Pattern Present
08:18:32	Pattern Present

Signaling done.

Description:

Item	Description
Time	Time is recorded in one-second intervals. Format is 24-hour
	clock in hours:minutes:seconds with colons to separate the digits,
	as in 08:30:45 and 15:22:10.
FBE	Number of Frame Bit Errors (4095 maximum) in one-second
	interval
BE	Number of Bit Errors (4095 maximum) in one-second interval
CRC	Number of Cyclical Redundancy Check errors (1023 maximum)
	in one-second interval
BPV/LCV	Number of Bi-Polar Violations and Line Code Violations
	(16,383 maximum) in one-second interval
Totals	Total number of errors for 10-second test interval
Error Rates	Total error rates measured during the 10-second test interval,
	expressed in scientific notation where "e" indicates a power of
	10. For example, 1 error per 1.544 megabits is 6.520000e-07.
	The maximum value is 2.700000e-03.

18-80 August 2003 Access Navigator - Release 1.8