Carrier Access Access Navigator user manual Ordering Information

Access Navigator / GR-303 + Data Host

CSA Requirements

CSA Requirements

This telecommunication network equipment conforms with Canadian Standards Association (CSA) standard C22.2 No. 950.95. To maintain this compliance, all access covers must be replaced after servicing the equipment to prevent fires from spreading to nearby equipment.

Ordering Information

Part Number	Item	Description
930-0201	AN/GR-303/R/32	Access Navigator GR-303 + Data Host,
		32 T1 Redundant Package:
		2 AN-GR-303 Controller Cards
		8 AN-Quad T1 Framer Cards
930-0200	AN-Case	Access Navigator redundant NEBS chassis and
		backplane. Chassis holds two Controller cards
		and eight Quad T1 Framer cards (32 T1 circuits).
		Order cards separately.
740-0017	AN-GR-303	Access Navigator Controller card with GR-303
	Controller Card	and DCS software.
740-0018	Quad T1 Framer Card	Access Navigator Quad T1 Framer card
		terminates 4 T1 interfaces from switch, customer
		site, or data network.
005-0025	DSX-1 Cable	64-pin DSX-1 cable, 10 feet long, male/male.
		Two cables must be ordered per Access
		Navigator, one TX, one RX. May be used for
		DS1 and DSX-1 transmission levels.
005-0030	DSX-1 Cable	64-pin DSX-1 cable, 25 feet long (see 005-0025).
710-0153	19”/23” Universal	Universal mounting brackets and screws for 19
	Mounting Brackets	and 23 inch equipment racks. This bracket set is
		included with all Access Navigator unit
		purchases.
710-0003	19” Vertical Mount	Two heavy-duty 19 inch horizontal crossbars
	Crossbars	mount in equipment rack and enable vertical
		installation of up to 6 Access Navigator and Wide
		Bank 28 products.
710-0004	23” Vertical Mount	Two heavy-duty 23 inch horizontal crossbars
	Crossbars	mount in equipment rack and enable vertical
		installation of up to 6 Access Navigator and Wide
		Bank 28 products.
770-0079	AN-Manual	Access Navigator User Manual is included with
		all Access Navigator unit purchases.

3-16 August 2003 Access Navigator - Release 1.8