Carrier Access Access Navigator Basic Provisioning Overview, Basic Provisioning Quick Guide

Provision Access Navigator

Basic Provisioning Overview

Basic Provisioning Overview

This procedure covers provisioning of basic Access Navigator settings including the System ID, date, time, password security, and the Ethernet and SNMP interfaces. These basic settings are required for management of the Access Navigator by RS-232, Telnet, SNMP, and element management programs such as Valet™ and NetworkValet™ EMS.

Remote	Telnet CLI
Management	& SNMP
	CLI
Network
Operations
Center

Hub or

Network

Modem or

Direct

Ethernet

RS-232

Access

Navigator

Figure 8-1 Access Navigator Management Architecture

Basic Provisioning Quick Guide

Basic provisioning involves setting up the Access Navigator for network operation and remote management. Basic provisioning includes the following items.

CLI Commands	Descriptions
status equipment	Verify system configuration.
set id <"id">	System Identifier or CLLI code.
set date <mm/dd/yyyy>	Date with four-digit year.
set time <hh:mm:ss>	Time with 24-hour clock.
set ethernet ip address none	Disable Ethernet interface if not used.
set ethernet ip address <address>	Enable Ethernet interface.
<mask>
set ip gateway <address>	IP gateway address.
add user <name>	Add user name.
set user <name> level <access>	Access level.
set user <name> password	Password.
delete user <name>	Remove user.

8-2 August 2003 Access Navigator - Release 1.8