Carrier Access Access Navigator Performance Description Thresholds, Remote Device Mgmt on

CLI Language Reference

CLI Command List

Item	Description
PPHONE Call	ENABLED, DISABLED. This setting is enabled by the Set DS1
Connection	Remote Device Mgmt on page 18-113.
FDL Type	NONE, SLC96 (DDL), T1403 (ANSI T1.403). Switch DS1 FDL
	type is always None.
Send Code	P2E11, P2E15, P2E23, QRSS. (Does not appear unless a code is
	being sent.
Performance Thresholds	See table below

Performance	Description
Thresholds
unavailable seconds	(UAS) The number of seconds that the interface is unavailable.
	The DS1 interface is said to be unavailable from the onset of 10
	contiguous SESs, or the onset of the condition leading to a
	failure. If the condition leading to the failure was immediately
	preceded by one or more contiguous SESs, then the DS1
	interface unavailability starts from the onset of these SESs.
	While the interface is deemed unavailable, the only count that is
	incremented is UASs.
severely errored	(SES) For ESF links, the number of one-second intervals
seconds	containing 320 or more Path Code Violation Error Events OR
	one or more Out of Frame defects OR a detected AIS defect.
	For D4 signals, the number of one-second intervals with Framing
	Error events, or an OOF defect, or 1544 LCVs or more.
	Controlled slips are not included in this parameter.
	SES is not incremented during an Unavailable Second.
errored seconds	(ES) For ESF links, the number of one-second intervals
	containing one or more Path Code Violations OR one or more
	Severely Errored Frame defects OR one or more Controlled Slip
	events OR a detected AIS defect.
	For D4 links, the presence of Bipolar Violations also triggers an
	Errored Second.
	ES is not incremented during an Unavailable Second.
sev. errored frame	(SEFS) The number of one-second intervals containing one or
seconds	more Out of Frame defects OR a detected AIS defect.

18-142 August 2003 Access Navigator - Release 1.8