Carrier Access Access Navigator Send Remote V35 Line Loopup, Syntax send remote n v35 line loopup

Diagnostics & Troubleshooting

Send Remote T1 Drop Payload Loopup

Send Remote T1 Drop Payload Loopup

This command makes the remote Access Bank II perform a Time Slot Interface (TSI) loopback on the T1drop side. This takes the received T1drop DS0s, loops them in the TSI, and sends them back to the T1drop output. See Figure 15-19.

Syntax: send remote <n> t1drop tsi loopup

								T1 Drop
CA FDL						Payload Loopup
Command
				Access Bank II
Access			Framer		Time Slot
	DS1	T1					DS0s Framer
Navigator				Interchange

T1 Drop

Figure 15-19. Remote T1 Drop Payload Loopup

Send Remote V35 Line Loopup

This command makes the remote Access Bank II perform a line loopback in the V.35 interface. This takes the received V.35 signal, loops it in theV.35 interface, and sends it back to the V.35 output. See Figure 15-20.

Syntax: send remote <n> v35 line loopup
									V.35
CA FDL							Line Loopup
Command
				Access Bank II
Access						Time Slot		Interface
	DS1	T1	Framer
Navigator
					Interchange

V.35

Figure 15-20. Remote V.35 Line Loopup

Access Navigator - Release 1.8 August 2003 15-41