Carrier Access Access Navigator user manual Set Snmp Contact, Set Snmp GetCom

CLI Language Reference

CLI Command List

Set SNMP Contact

Purpose: Assigns a system contact name (sysContact) to the Access Navigator SNMP interface. This is the person or office to be contacted when there are service questions. In most cases, this is the site manager.

Syntax: set snmp contact <"setting">

Field	Description
"setting"	The contact name is a text string up to 255 characters long, and
	may use any combination of letters and numbers. Settings must
	be enclosed in quote marks.

Example: set snmp contact "site manager"

Set SNMP GetCom

Purpose: Assigns a Get-Community string (getCommunity) to the Access Navigator SNMP interface. This is the user name for system access using SNMP “get” commands to retrieve settings. This name will be verified before changing data. For unrestricted access, it is traditional to set this string to “public” on both the Access Navigator and network manager.

To protect management access, the Community names can only be viewed and changed by CLI commands.

Security: Level 2 (operator)

Syntax: set snmp getcom <"setting">

Field	Description
"setting"	The get-community name is a text string up to 32 characters
	long, and may use any combination of letters and numbers.
	Settings must be enclosed in quote marks.

Example: set snmp getcom "public"

18-128 August 2003 Access Navigator - Release 1.8