Carrier Access Access Navigator user manual GR-303 Provisioning Quick Guide

			Provision GR-303 Service
			GR-303 Provisioning Quick Guide
GR-303 Provisioning Quick Guide
	CLI Commands		Descriptions
	status equipment		Verify equipment configuration.
	show ds1 <nall>		Verify service status.
	status ds1 <n>
	status ds0 <n:ch>
	set ds1 <n> down		Set unused circuits out of service
	set ds0 <n:ch> down		(down). If the DS1 is not terminated,
	set ds0 <n:ch> type <voicedata>		set the DS0 type of all channels to
			data. If the DS1 is terminated, set the
			DS0 type of any unused channels to
			match the DS0 type (voice or data)
			configured on the device at the other
			end of the DS1.
	set clock1 <bitsds1 ninternal>		Primary system clock source.
	set clock2 <bitsds1 ninternal>		Secondary system clock source.
	set switch type <5essdmsgeneric>		Ensures switch compatibility.
	set ds1 <n> type <switchgroomdrop>		DS1 type.
	set ds1	<n> framing <d4esfslc96>	DS1 framing.
	set ds1	<n> linecode <amib8zs>	DS1 line code.
	set ds1	<n> id <"id">	DS1 identifier.
	set ds1	<n> termid <id>	Switch DS1 terminal identifier.
	set ds1	<n> clock <normalloop>	DS1 clock source.
	set ds1	<n> lbo <setting>	DS1 line buildout.
	set ds1	<n> fdl <noneslc96t1403>	DS1 FDL type.
	set ds1 <n> remote device mgmt		Management link for remote
	<nonecafdlcaip <ipaddress>ds1 n>		Access Bank II and Adit 600.
	set ds1 <n> remote device mgmt		Enables call communications channel
	caip <ipaddress> pphone		for remote Adit 600 providing
			P-Phone service.
	set eoc	primary <n:chnone>	EOC channels.
	set eoc	secondary <n:chnone>
	set tmc	primary <n:chnone>	TMC channels.
	set tmc	secondary <n:chnone>
	set ds1	<n> loopdetect <onoff>	Usually off for drop DS1s.
	set ds0	<n:ch> type <voicedatagr303>	DS0 type.
	set ds0	<n:ch> pphone	P-Phone channels.

Access Navigator - Release 1.8 August 2003 10-9