Carrier Access Access Navigator user manual Set ds1 n type drop, Set ds1 n linecode amib8zs

Provision Remote Adit 600 via FDL

Provision Drop DS1s to Remote Adit 600

4. Set DS1 type to “drop”

set ds1 <n> type drop

Example: set ds1 1 type drop

5.Set DS1 framing to ESF or D4 (SF). Use ESF for FDL management. set ds1 <n> framing esf

Example: set ds1 1 framing esf

6. Set DS1 line code

set ds1 <n> linecode <amib8zs>

Example: set ds1 1 linecode esf

7.Set drop DS1 clock source to normal or loop set ds1 <n> clock <normalloop>

Example: set ds1 10 clock normal

8.Set DS1 FDL type to none. set ds1 <n> fdl none

Example: set ds1 1 fdl none

9.Set DS1 remote device management type to use CAFDL for Carrier Access FDL management. set ds1 <n> remote device management cafdl

Example: set ds1 1 remote device management cafdl

10.Set all other drop DS1s to same remote Adit to point to DS1 using CAFDL. set ds1 <n> remote device mgmt ds1 <n>

Example: set ds1 1 remote device management cafdl

11.Set drop DS1 line buildout (lbo) to required DSX-1 equalization or CSU attenuation set ds1 <n> lbo <setting>

Example: set ds1 1 lbo 1

The setting is a number from 1 to 9, and is defined as follows:

Setting Definition

1Set DSX-1 equalization for 0-133 ft.

2Set DSX-1 equalization for 133-266 ft.

3Set DSX-1 equalization for 266-399 ft.

4Set DSX-1 equalization for 399-533 ft.

5Set DSX-1 equalization for 533-666 ft.

6Set CSU attenuation for LBO of 0dB.

7Set CSU attenuation for LBO of -7.5dB.

8Set CSU attenuation for LBO of -15dB.

9Set CSU attenuation for LBO of -22.5dB.

NOTE: When loop code detection is turned on, the Access Navigator will respond to T1.403 ESF bit patterned loop requests. Loop detection is normally turned off for DS1 drops.

Access Navigator - Release 1.8 August 2003 12-11