Carrier Access Access Navigator user manual Verify Service Status, Show ds1 all

Provision DCS Service

Verify Service Status

Verify Service Status

1.Verify number of DS1 circuits installed by comparing equipment status with office records. If there is a discrepancy, follow standard practices to resolve problem.

2.Show current DS1 service status with the following command:

show ds1 all

A message similar to the following will appear, showing the link up/down service status of all DS1s in the Access Navigator, as well as certain other parameters of common interest in provision- ing and trouble-shooting.

			Line		Term		Remote
Circuit ID	Link	Type				FDL	Device
			Code Framing		ID		Mgmt
----------	----	------	---- ------- ----			-----	------
CA DS1# 01	DOWN	DROP	B8ZS	ESF		None	None
CA DS1# 02	DOWN	DROP	B8ZS	ESF		None	None
CA DS1# 03	DOWN	DROP	B8ZS	ESF		None	None
CA DS1# 04	DOWN	DROP	B8ZS	ESF		None	None
CA DS1# 05	DOWN	DROP	B8ZS	ESF		None	None
CA DS1# 06	DOWN	DROP	B8ZS	ESF		None	None
CA DS1# 07	DOWN	DROP	B8ZS	ESF		None	None
CA DS1# 08	DOWN	DROP	B8ZS	ESF		None	None
CA DS1# 09	UP	DROP	B8ZS	ESF		None	CA FDL
CA DS1# 10	UP	DROP	B8ZS	ESF		None	CA IP
CA DS1# 11	DOWN	DROP	B8ZS	ESF		None	None
CA DS1# 12	DOWN	DROP	B8ZS	ESF		None	None
CA DS1# 13	DOWN	DROP	B8ZS	ESF		None	None
CA DS1# 14	DOWN	DROP	B8ZS	ESF		None	None
CA DS1# 15	DOWN	DROP	B8ZS	ESF		None	None
CA DS1# 16	UP	DROP	AMI	D4		None	None
CA DS1# 17	UP	DROP	AMI	D4		None	None
CA DS1# 18	UP	DROP	B8ZS	SLC96		None	SLC96
CA DS1# 19	UP	DROP	B8ZS	SLC96		None	None
CA DS1# 20	UP	DROP	B8ZS	ESF		T1403	None
CA DS1# 21	UP	GROOM	B8ZS	ESF		None	None
CA DS1# 22	UP	GROOM	B8ZS	ESF		None	None
CA DS1# 23	UP	GROOM	B8ZS	ESF		None	None
CA DS1# 24	UP	GROOM	B8ZS	ESF	1	None	None
CA DS1# 25	DOWN	SWITCH	B8ZS	ESF		None	None
CA DS1# 26	DOWN	SWITCH	B8ZS	ESF	3	None	None
CA DS1# 27	DOWN	SWITCH	B8ZS	ESF	4	None	None
CA DS1# 28	DOWN	SWITCH	B8ZS	ESF	5	None	None
CA DS1# 29	DOWN	SWITCH	B8ZS	ESF	2	None	None
CA DS1# 30	DOWN	SWITCH	B8ZS	ESF	6	None	None
CA DS1# 31	DOWN	SWITCH	B8ZS	ESF	7	None	None
CA DS1# 32	UP	GROOM	B8ZS	ESF		None	None

NOTE: In the above message, the DS1 type may be drop, groom, or switch. The “switch” type will appear only in Access Navigator versions with the GR-303 Option. The line termination identifier (TermID) is used only for communicating over the EOC and TMC with the GR-303 switch.

3.Verify number of DS1s already in service (link is up) by comparing DS1 link status with office records. If there is a discrepancy, follow standard practices to resolve problem.

9-8 August 2003 Access Navigator - Release 1.8