Setting the BLUETOOTH Device
Select one of 5 connected BLUETOOTH compatible devices that you previously registered.
Setting item: PAIRED DEV
Turn the Rotary encoder to select a BLUETOOTH compatible device you want to use (you want to change connection) and then press 
/ 
/ENT.
•If the connection is successfully changed, “CONNECTED” is
displayed for 2 seconds and the 
indicator lights up, then the display returns to the SETUP screen.
•If you input the wrong passcode or communications fail, “FAILED” is displayed.
•If you want to connect another BLUETOOTH compatible device, after disconnecting the current BLUETOOTH compatible device, connect the BLUETOOTH compatible device you want to change to. The PIN code is fixed as “0000”.
Setting the Search Mode
You can set whether this unit can be recognized or not from a BLUETOOTH compatible device. Normally set this to VISI M ON.
Setting item: VISIBLE M
VISI M ON: Enable recognition of this unit from the BLUETOOTH compatible device.
VISI M OFF: Disable recognition of this unit from the BLUETOOTH compatible device.
•Depending on the mobile phone, it may be necessary to input a passcode. For inputting the mobile phone’s passcode, refer to the mobile phone’s Owner’s Manual.
Setting the Received Calls automatically (Auto Answer)
When a call is received, you can set whether to receive it automatically or not.
Setting item: AUTO ANS
AT ANS ON: When a call is received, it is answered automatically after about 5 seconds.
AT ANS OFF: When a call is received, it is not answered automatically. Press 
to receive the call.
•If the received call setting on the mobile phone is on, the call will be answered automatically even though this setting is set to OFF.
Deleting a BLUETOOTH Device from the list
You can delete the history of a previously connected BLUETOOTH compatible device.
Setting item: CLEAR DEV
1 Turn the Rotary encoder to select the BLUETOOTH compatible device to be deleted and then press
/ 
/ENT.
2 Turn the Rotary encoder to select CLEAR YES if you want to delete and then press 
/ 
/ENT.
•Selecting CLEAR NO will cancel the setting.
•The registration number 5 is deleted once the ignition key goes from ACC to off.
Displaying the phone service provider name
Setting item : SEV NAME
The service provider name of the connected BLUETOOTH compatible device will be displayed. If a BLUETOOTH compatible device is not connected, “ID UNSENT” will also be displayed.
•Depending on the character type some phone service provider name cannot be displayed. “ID UNSENT” will also be displayed.
Adjusting the volume for the microphone input
You can emphasize or weaken the microphone input volume level.
Setting item : MIC INPUT
Turn the Rotary encoder to select the desired volume level (0~7).
•The setting cannot be adjusted during a phone call. Adjust the setting before placing a call.
Selecting the output speaker
You can select the connected speaker in car to output the sound signal of telephone.
Setting item : SPEAKER SL
ALL: The sound be output from all of speakers in car.
•The setting cannot be adjusted during a phone call. Adjust the setting before placing a call.
Displaying the firmware version
Setting item : FW VERSION
The current firmware version will be displayed.
Updating the firmware
Setting item: FW UPDATE
With this setting, the BLUETOOTH firmware update function can be activated, but other devices and software may be required. For details, consult ALPINE website.
