Carrier Access Access Navigator user manual Disconnect Remote, Exit Remote Session Ctrl+C

CLI Language Reference

CLI Command List

Disconnect Remote

Purpose: Removes the DS0 connections established by the connect remote command.

Security: Level 2 (operator)

Syntax: disconnect remote <"name">

Field

name

Description

The user defined name for the fractional interface. The name must be enclosed in quotes.

Example: disconnect remote "AcmeV35"

Exit

Purpose: Ends management session and logs out the user. When finished with a management session, it is important to log out from the Access Navigator by typing the exit command. Logging out will maintain network security, ensuring that the next user must log in with a valid user name and password.

Security: Level 3 (monitor)

Syntax: exit

Exit Remote Session (Ctrl+C)

Purpose: To end a remote CLI management session to an Adit 600 terminal, press the Ctrl+C keys to cancel the connection to the remote Adit 600 terminal. The Access Navigator prompt will then appear. To start a remote session, seeLogon Remote on page 18-44.

NOTE: To enter the Ctrl+C command, hold down the Control (Ctrl) key on the keyboard and press the C key. Some terminal programs must be configured to pass through control codes, rather than intercepting the control codes as commands to the terminal program.

18-34 August 2003 Access Navigator - Release 1.8