Carrier Access Access Navigator user manual Download Configuration

Update Controller Card Software

Download Configuration

Download Configuration

This step is optional and will restore the uploaded Access Navigator configuration settings if accidentally lost for any reason.

CAUTION! CONFIGURATION FILES ARE NOT COMPATIBLE BETWEEN DIFFERENT SOFTWARE VERSIONS (INCLUDING FEATURE OPTIONS SUCH AS DCS, GR-303,OR P- PHONE). SERVICE DISRUPTIONS CAN OCCUR IF A CONFIGURATION FILE CREATED BY ONE SOFTWARE VERSION IS DOWNLOADED TO AN ACCESS NAVIGATOR RUNNING A DIFFERENT VERSION.

CAUTION! THE ACCESS NAVIGATOR MUST BE RESET AFTER USING THE LOAD CONFIGURATION COMMAND. THIS WILL TEMPORARILY DISRUPT SERVICE.

1.Load current configuration settings with the following command: load tftp config <ipaddress> <"file">

Example: load tftp config 192.168.118.65 "AN26"

CAUTION: This command needs to be followed by a system reset.

Failure to do so could result in unpredictable results.

Do you really want to load the configuration flash (y/n)? y

0131088 bytes transferred

Configuration download complete.

Please do a 'reset all' at this time.

.

Field	Description
ipaddress	IP address where configuration file is to be stored. (This is the IP
	address of the TFTP server.) IP address has format
	xxx.xxx.xxx.xxx, where xxx is a number from 0 to 255.
file	File name used to save the configuration data. The file and
	optional path must be enclosed in quotes, as in
	"C:\CONFIG\AN26". The default path is the root directory of the
	TFTP server.
blocksize	Transmission block size (optional), 512 to 8192. The default is
	8192 bytes.

2.Reset Access Navigator with the following command: reset all

Example: reset all

Do you really want to reset (y/n)? y

17-10 August 2003 Access Navigator - Release 1.8