Carrier Access Access Navigator user manual 18-12

CLI Language Reference

Context Sensitive Help

More details are provided as you type additional words for the partial command. For example, typ- ing help set ds1 and pressing the Enter or Return key will produce a message similar to the following, with more help on setting DS1 parameters.

Access Navigator> help set ds1

set	Configure an interface.
ds1	Setup the specified DS1.
	Command syntax: set ds1 <n> <setting>
	Example: set ds1 1 framing d4
	The above example sets DS1 #1 to D4 framing.
	n=DS1 1 to 32 or a range 1-4 (DS1s 1,2,3,4)
clock	setting=DS1 setting to apply (see list below)
	Set the transmit clock source.
down	Set the DS1 as Out of Service.
fdl	Set the DS1 FDL type.
framing	Set the DS1 framing type.
id	Set the DS1 circuit identification string.
lbo	Set the DS1 line length or line build out.
line	Command a line loopback on the DS1.
linecode	Set the DS1 line coding.
loopdetect	Set detection of FDL loop code.
payload	Command a payload loopback on the DS1.
type	Set the GR-303 usage type for the DS1.
up	Set the DS1 as In Service.

18-12 August 2003 Access Navigator - Release 1.8