Carrier Access Access Navigator user manual Show CRV, Syntax show crv range, Example show crv

	CLI Language Reference
	CLI Command List
Item	Description
.....	Indicates no current connection to another DS0 in the Access
	Navigator. (GR-303 connections are dynamic and will be
	displayed when calls are connected.)
Type	VOICE – voice channel
	DATA – data channel
	GR303 – GR-303 voice channel or ISDN BRI 4:1 TDM
	EOC-P – EOC primary channel
	EOC-S – EOC secondary channel
	TMC-P – TMC primary channel
	TMC-S – TMC secondary channel
Interface	Name of fractional interface, if any, using "From" DS0.
[--> Port]	Remote interface port, if any, connected to fractional interface.

Show CRV

Purpose: Displays the range of CRVs requested (up to 24), along with the DS1 and DS0 channel to which they are currently assigned.

Factory default CRVs are sequentially numbered from 1 to 768, starting with the first DS0 channel on DS1 #1 and continuing to the last DS0 channel on DS1 #32. See Figure 18-30 on page 18-138.

If desired, the user can assign different CRV numbers. (See Set DS0 CRV on

page 18-97.) The only requirement is that the CRVs for all assigned GR-303 or TR-08 voice terminations must be different.

NOTE: In the following command, there can be up to 24 CRVs in a range, such as 1-24 or 110-134. The CRVs do not have to be on the same DS1.

Security: Level 3 (monitor)

Syntax: show crv <range>

Field	Description
range	Call Reference Value, 1 to 768, or a range of values such as 15-
	18. Maximum range is 24 CRVs.

Example: show crv 6

Example: show crv 1-8

Message:

CRV	Interface			Status
---	---------			------
1	DS1	#1	channel 1	In	Service
2	DS1	#1	channel 2	In	Service

Access Navigator - Release 1.8 August 2003 18-137