Carrier Access Access Navigator user manual IP DS0 Management Configuration

Provision Remote Adit 600 via IP DS0

IP DS0 Management Configuration

IP DS0 Management Configuration

IP DS0 management can be used with T1 Type 2 facilities lacking FDL capability. This scheme uses an external colocated Ethernet/T1 router, such as an Adit 600 with Adit Router card installed. The router sends IP management and provisioning commands over a DS0 management channel to the remote Adit 600. This enables both the Network Operations Center and the Access Navigator to communicate with the remote Adit 600. The management DS0 also carries control messages for ISDN BRI and P-Phone applications.

The Access Navigator crossconnects the management DS0 in the groom DS1 to a drop DS1 going to the remote Adit 600. The IP DS0 management channel must be carried by a DS1 connected to one of the two T1 ports on the remote Adit 600 Controller card. The following figure shows a typical IP addressing scheme for managing several remote Adits.

NOTE: To provision IP DS0 management, it is necessary to configure the Access Navigator, remote Adit 600, and colocated Adit Router. This manual includes Quick Guides for all three products. For detailed information, refer to the Adit 600 User Manual and Adit Router User Manual.

NOTE: P-Phone support requires the following minimum software versions:

Access Navigator: release 1.8 or higher

Adit 600 Controller (colocated) : release 5.0 or higher Adit 600 Controller (remote) :release 6.0 or higher IP Router card: release 1.5 or higher

Terminal Server Router (TSR) card: release 1.0 or higher

Customer Media Gateway (CMG) Router card: release 1.1 or higher

Network	On-Net				Customer
Operations	Location				Premises
Center	Ethernet	Adit 600			Adit 600
	Hub	(colocated)			(remote)
			DS1 25	DS1 1
		Adit 600	DS0 1	DS0 24	Adit 600
		IP		IPDS0 = X.X.X.1
IP = X.X.X.1		Router			￿
					￿
					￿
Management	Access		Groom		Up to 24
Console					Remote Adits
	Navigator		DS1		Adit 600
			Drop DS1s	DS1 24	(remote)
	ACCESS		￿
	NAVIGATOR			DS0 24
			￿
			￿
					Adit 600
	Static DS0 Management
	Connnections between
	Groom and Drop DS1s			IPDS0 = X.X.X.24

Figure 13-2 Carrier Access IP DS0 Management Configuration

Access Navigator - Release 1.8 August 2003 13-3