Carrier Access Access Navigator user manual Log, Example load tftp config 192.168.118.65 AN26

CLI Language Reference

CLI Command List

Field	Description
file	File name used to save the configuration data. The file and
	optional path must be enclosed in quotes, as in
	"C:\CONFIG\AN26". The default path is the root directory of the
	TFTP server.
blocksize	Transmission block size (optional), 512 to 8192. The default is
	8192 bytes.

Example: load tftp config 192.168.118.65 "AN26"

Log

Purpose: Displays log events. The Access Navigator maintains a log of the most recent 400 alarms and informational events.The log file will be erased by a power interruption, clear log command, reset command, or restore defaults command. Log records are useful because they show both when an event occurred and when it was cleared. (For a detailed description of these messages, see Alarm Clearing on

page 14-1.)

NOTE: The Access Navigator will start recording events when first powered up. Consequently, the recorded time and date will start with initial values of 00:00:00 01/01/1998 and will continue until the user sets a new time and date.

Security: Level 3 (monitor)

Syntax: log

Displays all log events except BERT, TMC and Configuration change events.

Syntax: log <majorminoralertinfo>

Displays only alarms with a specified severity.

Syntax: log ds1 <n>

Displays only DS1 alarms.

Syntax: log ds1 <n> <majorminoralertinfo>

Displays only DS1 alarms with a specified severity level.

Syntax: log equipment

Displays only equipment alarms.

Syntax: log equipment <majorminoralertinfo>

Displays only equipment alarms with a specified severity level.

Syntax: log info

Displays only informational events.

18-38 August 2003 Access Navigator - Release 1.8