Carrier Access Access Navigator user manual Rts

	FDL Interface
	Access Bank II Capabilities
Access Bank II Capabilities (Continued)
Interface	Capabilities and Settings
RS-232 interface	Asynchronous RS-232 port for subrate data
	connection between two Access Bank II terminals
	Assignable to one DS0
	Baud rate: 1200, 2400, 4800, 9600, 19200, 38400,
	57600
	Data bits: 7, 8
	Start bits: 0
	Stop bits: 1, 2
	Parity: None, Even, Odd
	Receive clock: Internal, External
	Loopback: line
SDSL interface	High-speed data port for SDSL router
	Data rates up to 1.024 Mbps
	Assignable to a group of up to 16 DS0s
	SDSL port replaces T1 #2 port on Access Bank II/
	SDSL
T1 Drop interface (T1 #1 or #2)	Drop and insert port for T1 PBX
	High-speed data port for T1 router
	Assignable to a group of one or more DS0s
	DS0s on T1 drop are assigned sequentially, starting
	with DS0 #1
	Framing: D4 (SF), ESF
	Line code: AMI, B8ZS
	Line build out: 0 to 666 feet, 0 to –22.5 dB
	Loopback: line, payload
V.35 interface	High-speed data port for network router connection
	Assignable to a group of one or more DS0s
	Data speed (Kbps): Nx56 or Nx64, where N is the
	number of DS0s assigned
	CTS: Force High, Force Low, Follow CD, Follow
	RTS
	Rx timing: Internal, External
	Clock inversion: None, Rx, Tx, Rx and Tx
	Data inversion: None, Invert
	V.54 Data Service Unit (DSU) loopcode detection:
	on, off

Access Navigator - Release 1.8 August 2003 B-5