Carrier Access Access Navigator user manual Configuration Change Log

Diagnostics & Troubleshooting

Configuration Change Log

Syntax: log ds1 <n>

Displays only DS1 alarms.

Syntax: log ds1 <n> <majorminoralertinfo>

Displays only DS1 alarms with a specified severity level.

Syntax: log equipment

Displays only equipment alarms.

Syntax: log equipment <majorminoralertinfo>

Displays only equipment alarms with a specified severity level.

Syntax: log info

Displays only informational events.

Syntax: clear log

Erases all data in the log file.

Configuration Change Log

The Access Navigator maintains a log of the most recent 500 configuration changes in a separate log file, which can be displayed using the CLI log config command (see Log Config on page 18-41). Filtering options allow the user to display selected events. The Access Navigator also records the Management Interface causing the change – CLI, EOC, SNMP, or ICC (inter-controller commands).

Syntax: log config

Displays all configuration log events.

Syntax: log config ds0 <n:ch>

Displays only the configuration management events affecting a DS0 channel or range of channels.

Syntax: log config ds1 <n>

Displays only the configuration management events affecting a DS1 or range of DS1s.

Syntax: log config crv <value>

Displays only the configuration management events affecting a CRV or range of

CRVs.

Syntax: log config source <clieocsnmpicc>

Displays only the configuration management events from a management interface.

Syntax: clear config log

Erases all data in the configuration change log file.

15-6 August 2003 Access Navigator - Release 1.8