Carrier Access Access Navigator user manual Set ds1 32 framing esf

Provision Remote Adit 600 via IP DS0

Provision Groom DS1s to Adit Router

3.Set DS1 out of service with the following command: set ds1 <n> down

Example: set ds1 32 down 4. Set DS1 type to “groom”

set ds1 <n> type groom

Example: set ds1 32 type groom

5.Set DS1 framing to ESF (default) for Carrier Access IP DS0 management. set ds1 <n> framing esf

Example: set ds1 32 framing esf

6.Set DS1 line code to B8ZS (default) for Carrier Access IP DS0 management set ds1 <n> linecode b8zs

Example: set ds1 32 linecode b8zs

7.Set drop DS1 clock source to normal (default) for Carrier Access IP DS0 management set ds1 <n> clock normal

Example: set ds1 32 clock normal

8.Set drop DS1 line buildout (lbo) to required DSX-1 equalization or CSU attenuation. Setting 1 is typical for a coloated Adit Router.

set ds1 <n> lbo <setting>

Example: set ds1 32 lbo 1

The setting is a number from 1 to 9, and is defined as follows:

Setting Definition

1Set DSX-1 equalization for 0-133 ft.

2Set DSX-1 equalization for 133-266 ft.

3Set DSX-1 equalization for 266-399 ft.

4Set DSX-1 equalization for 399-533 ft.

5Set DSX-1 equalization for 533-666 ft.

6Set CSU attenuation for LBO of 0dB.

7Set CSU attenuation for LBO of -7.5dB.

8Set CSU attenuation for LBO of -15dB.

9Set CSU attenuation for LBO of -22.5dB.

Access Navigator - Release 1.8 August 2003 13-13