Carrier Access Access Navigator user manual Set Snmp TrapCom, Set Switch Type

CLI Language Reference

CLI Command List

Set SNMP TrapCom

Assigns a Trap-Community string (trapCommunity) to the Access Navigator SNMP interface. This is the user name reported with each trap message for authentication.

Security: Level 2 (operator)

Syntax: set snmp trapcom <"setting">

Field	Description
"setting"	The trap-community name is a text string up to 32 characters
	long, and may use any combination of letters and numbers.
	Settings must be enclosed in quote marks.

Example: set snmp trapcom "public"

Set Switch Type

Purpose: This command identifies the switch type used for GR-303 operation and specifies the managed object classes that the Access Navigator must support. This command applies to all Access Navigator items managed over the GR-303 EOC. To see the current setting, see Show Switch on page 18-154.

Security: Level 2 (operator)

Syntax: set switch type <5essdmsgeneric>

Field

5ess

dms

generic

Description

Set switch type to Lucent 5ESS.

Set switch type to Nortel DMS.

Set switch to generic type (Telcordia generic TR-303 specification, Supplement 3 EOC definition)

Example: set switch type 5ess

Access Navigator - Release 1.8 August 2003 18-131