Carrier Access Access Navigator Set Screen, Syntax set remote n v35 speed, Example set screen

CLI Language Reference

CLI Command List

Security: Level 2 (operator)

Syntax: set remote <n> v35 speed <5664>

Field

n

56

64

Description

DS1 number, 1 to 32.

Selects N times 56 Kbps speed, where N is number of DS0s assigned.

Selects N times 64 Kbps speed, where N is number of DS0s assigned.

Example: set remote 9 v35 speed nx64

Set Screen

Purpose: Sets the number of lines in the terminal display screen before the message pauses. If you enter the number of lines in the display screen, the CLI messages will automatically pause at the bottom of the screen to prevent data from scrolling off the screen. The CLI will print --More-- at the bottom of the screen to indicate that there is more data to be displayed.

Use the following keys to display more of the message.

￿Press Space key to advance message by one full screen.

￿Press Tab key to advance message by two lines.

￿Press Enter or Return key to advance message by one line.

￿Press Escape key to cancel remainder of message.

NOTE: The factory default setting is 24 text lines. If messages scroll off the screen, either adjust the window size on your computer or use the set screen command to set the number of text lines returned by the CLI.

Security: Level 3 (monitor)

Syntax: set screen <heightoff>

Field

height

off

Description

Height (in text lines) of terminal screen display. Defualt is 24.

Disables screen pause feature

Example: set screen 32

Access Navigator - Release 1.8 August 2003 18-127