Carrier Access Access Navigator Application Configuration Requirements, Permissible Selections

CLI Language Reference

CLI Command List

The application affects the permissible DS1 Type, Framing, Line Code, FDL, and Remote Management selections.

Table 18-3 Application Configuration Requirements

		Permissible Selections
	DS1	DS1	DS1 Line	DS1	Remote
Application
	Type	Framing	Code	FDL	Mgmt
Voice to GR-303 switch	Switch	ESF	B8ZS	None	None
Voice or data to DCS switch	Groom	D4 or	AMI or	None	None
		ESF	B8ZS
Voice or data to subscriber	Drop	D4	AMI or	None	None
drop			B8ZS
Voice or data to subscriber	Drop	ESF	AMI or	None or	None
drop			B8ZS	T1403
Adit 600 TDM (FDL mgmt)	Drop	ESF	B8ZS	None	CA FDL
(controller management DS1)
Adit 600 TDM (FDL mgmt)	Drop	ESF	B8ZS	None	DS1 <n>
(all other DS1s point to
controller management DS1)
Adit 600 TDM (IP mgmt)	Drop	D4 or	B8ZS	None	CA IP
(controller management DS1)		ESF
Adit 600 TDM (IP mgmt)	Drop	D4 or	B8ZS	None	DS1 <n>
(all other DS1s point to		ESF
controller management DS1)
Access Bank II	Drop	D4 or	AMI or	None	None
(not remotely provisioned)		ESF	B8ZS
Access Bank II	Drop	ESF	B8ZS	None	CA FDL
(remotely provisioned)
Access Bank I/TR-08 or	Drop	SLC96	AMI or	SLC96	None
SLC-96/TR-08 (Shelf A)			B8ZS
SLC-96/TR-08	Drop	SLC96	AMI or	None	None
(Shelf B, C, D)			B8ZS

NOTE: For remote management description of an Access Bank II or Adit 600 TDM terminal, see Set DS1 Remote Device Mgmt on page 18-113.

Security: Level 2 (operator)

Access Navigator - Release 1.8 August 2003 18-107