Carrier Access Access Navigator user manual Originating Calls Blocked Calls Secondary

Diagnostics & Troubleshooting

Status TMC

Originating Calls: 102

Blocked Calls:	0
Secondary	DS1 #29 channel 24
Channel:
Link Status:	Down
Mode:	Standby

Description:

Item	Description
Channel	Location of TMC, by DS1 and DS0 number.
Link Status	Up – indicates LAPD communications link with switch is
	established and healthy.
	Down – out of service.
	None – no link defined.
Mode	Active or Standby – One TMC is active and the other is in
	standby. If the active TMC fails, the switch will command the
	standby TMC to become active.
Active Calls	Number of currently active calls.
Permanent Calls	Number of calls currently set in a permanent off-hook state. This
	state will be cleared when an on-hook is observed for more than
	400 milliseconds.
Peak Calls	Maximum number of calls at one time.
Terminating Calls	Number of calls terminating on subscriber drops at current time.
Originating Calls	Number of calls originating from subscriber drops at current
	time.
Blocked Calls	Number of calls blocked by Access Navigator or switch. Switch
	may also refuse call if line configuration is not correct. Blocking
	can occur because:
	• Switch side DS0s are not available for call request.
	• Switch is not configured for call request from CRV.

15-26 August 2003 Access Navigator - Release 1.8