Carrier Access Access Navigator user manual Set Date, Set Time

Electrical Installation

Set Date

Set Date

NOTE: Date format is month/day/year with slashes to separate the digits, as in 01/30/ 1999.

1.Set current date by entering the following command: set date <mm/dd/yyyy>

Example: set date 01/30/2001

2.Show and verify date setting by entering the following command: show date

Requirement: Access Navigator responds with correct date.

Set Time

NOTE: Time format is 24-hour clock in hours:minutes:seconds with colons to separate the digits, as in 08:30:45 and 15:22:10.

1.Set current time by entering the following command: set time <hh:mm:ss>

Example: set time 08:30:45

The time will be updated when you press the Enter or Return key and the Access Navigator receives the command.

2.Show and verify time setting by entering the following command: show time

Requirement: Access Navigator responds with correct time.

Access Navigator - Release 1.8 August 2003 6-63