Provision Remote Adit 600 via IP DS0

Router Provisioning Quick Guide

Router Setup (Continued)

Configure Trunk Connections:

1.Select Configuration < Profile Directory > from Router Main Menu and press Enter key.

2.Select Router < Profile Setup > and press Enter key.

3.Select Trunk < Configure -> and press Enter key.

4.For all WAN port numbers already assigned a DS0 for management,

select < Frame Relay 1490 > as the WAN connections Type

5.Select the PVC Management as < Disabled >.

6.Press Escape key to Exit and <Yes> to save changes. This will return you to the Trunk Configure window. For these configuration changes to take effect, you must Reinitialize the Router as described later.

Configure the Local Adit Profile:

1.Select LocalAdit LAN <Setup -> and press Enter key.

2.Set the following on this screen:

Select the IP Protocol Eth II (with an X), all others should not be selected. Set the LAN Networks Updates for IP and IPX to < Neither >.

Set the LAN IP Address to the required Router IP Address along with the Subnet Mask.

3.Press Escape key to Exit and <Yes> to save changes.

Create a Remote Adit Profile for all Remotes:

1.Select RemoteAdit WAN <Setup -> and press Enter key.

2.Set the following on this screen:

Rename RemoteAdit (default name) to Adit1. Set WAN Networks Updates for IP to < Never >. Set WAN IP: Numbered to <No>.

3.Tab to Setup: <Static/VPN Networks> (scroll to this selection if it is not displayed).

4.Set Setup Static: to <IP Networks> (scroll to this selection if it is not displayed).

5.Press Ctrl A to add a Static IP Address.

6.Set Device Name to Adit1.

Set the IP Address to the Adit1 WAN address.

7.Press Escape key to exit and <Yes> to save changes.

8.Select Setup: <Trunk Port> and press Enter key.

9.Select the following on this screen:

At the Select WAN Port Number: <None>, scroll None to 1 (which is the remote Adit1). Set DLCI to 16.

10.Press Escape key to exit the Trunk Port configuration window.

11.Press Escape key to exit and <Yes> to save changes.

Reinitialize the Router:

1.Select Exit <Reinitialize> from the Router main window and press Enter key.

2.Select <YES> and press Enter key to reinitialize the Router Card. This will save all the changes recent made to the router.

13-6

August 2003

Access Navigator - Release 1.8

Page 302
Image 302
Carrier Access Access Navigator user manual Select the PVC Management as Disabled, Set Device Name to Adit1