Carrier Access Access Navigator user manual Status Isdn CRV, Syntax status isdn crv range

Diagnostics & Troubleshooting

Status ISDN CRV

Description:

Item	Description
CRV	Call reference value, 1 to 768
Status	The following states may occur:
	Not Assigned
	Not Available
	Assigned to ISDN
	In Service
	User set Out of Service
	Switch set Out of Service
	Card not Installed
	Facility failure
	DS1 Out of Service
Call Status	The following states may occur when CRV is In Service:
	Active – Call in progress (off hook)
	Idle – Line available (on hook)
	Permanent – Line not available because of permanent off-hook
	state

Status ISDN CRV

Displays a message listing the status of the specified ISDN BRI channels. To display the ISDN BRI channels, you must enter a CRV or range of CRVs.

NOTE: The status isdn crv command only applies to ISDN BRI channels transported in the GR-303 4:1 TDM mode. Other ISDN BRI channels transported using the 3DS0 mode are set up as digital crossconnections that can be examined using the status ds0 command.

Syntax: status isdn crv <range>

Field

range

Description

Call Reference Value, 1 to 768, or a range of values such as 15- 18. Maximum range is 24 CRVs.

Example: status isdn crv 6

Example: status isdn crv 1-4

Access Navigator - Release 1.8 August 2003 15-23