Carrier Access Access Navigator Read Remote, Syntax read remote n, Example read remote 9

CLI Language Reference

CLI Command List

Read Remote V35

Purpose: Reads and displays the V.35 settings from the remote Access Bank II at the far end of the Access Navigator’s DS1. The Access Bank II must be operational to read its settings. The command displays a message similar to the following.

Security: Level 3 (monitor)

Syntax: read remote <n> v35

Field	Description
n	DS1 number, 1 to 32.

Example: read remote 9 v35

Message:

V35:

datainv: normal

clkinv: none

cts: high

rxclk: internal

speed: nx64

dsu: Off

length: 4

Description:

Item	Description
datainv	Data polarity inversion: normal, invert
clkinv	Clock polarity inversion: none, invert
cts	Clear to Send signaling: always high, always low, follow cd,
	follow rts
rxclock	Receive clock source: internal, external
speed	Data speed (Kbps): Nx56 or Nx64, where N is length (number of
	DS0s)
dsu	V.54 Data Service Unit (DSU) loopcode detection: on, off
length	Number of DS0s assigned, 0 to 32

18-56 August 2003 Access Navigator - Release 1.8