Carrier Access Access Navigator user manual Example Set snmp nms 1

Provision Access Navigator

Set SNMP Properties

Example: set snmp setcom "Public"

8.Set SNMP Trap-Community string with the following command: set snmp trapcom <"setting">

Example: set snmp trapcom "Public"

NOTE: SNMP trap alarm messages can be sent to three different host IP addresses. Repeat the following command to set the IP address of each recipient.

9.Set up to three SNMP NMS (network management system) trap recipients by entering their IP addresses with the following command:

set snmp nms <123> <address>

Example: set snmp nms 1 192.168.118.65

8-12 August 2003 Access Navigator - Release 1.8