Carrier Access Access Navigator user manual 15-24

Diagnostics & Troubleshooting

Status ISDN CRV

Message:

CRV	Chan	Status		Call Status
---	----	------		-----------
1	B1	In Service		Active
1	B2	In Service		Active
1	D	In Service		n.a.
2	B1	In Service		Idle
2	B2	In Service		Idle
2	D	In Service		n.a.
3	B1	In Service		Idle
3	B2	In Service		Idle
3	D	In Service		n.a.
4	B1	User set Out of Service
4	B2	User set Out of Service
4	D	User set Out of Service
Description:
	Item		Description
	CRV		Call Reference Value, 1 to 768
	Chan		B1 – Bearer channel 1
			B2 – Bearer channel 2
			D – Signaling channel
	Status		The following states may appear:
			Not Assigned
			Not Assigned to ISDN
			Not Available
			In Service
			User set Out of Service
			Switch set Out of Service
			Under user test control
			In Loopback
			Card not Installed
			Facility failure
			DS0 is not a drop side GR303 channel
			DS1 Out of Service
	Call Status		The following states may occur when CRV is In Service:
			Active – Call in progress (off hook)
			Idle – Line available (on hook)
			Permanent – Line not available because of permanent off-hook
			state
			n.a. – not applicable

15-24 August 2003 Access Navigator - Release 1.8