Carrier Access Access Navigator user manual Set ds0 nch signal lsgsem

Provision Remote Adit 600 via FDL

Provision Drop DS0s

3. Set DS0 type

set ds0 <n:ch> type <voicedatagr303>

Example:	set ds0	10:1-18 type gr303
Example:	set ds0	10:19-24 type data

4.Set DS0 signaling (for voice only) to Loop Start (ls), Ground Start (gs), or E&M (em) signaling with the following command:

set ds0 <n:ch> signal <lsgsem>

Example: set ds0 10:1-18 signal ls

5.Set DS0 call reference value (GR-303 or ISDN BRI only) set ds0 <n:ch> crv <setting>

Example: set ds0 10:1 crv 120 6. Set DS0 in service

set ds0 <n:ch> up Example: set ds0 10:1-24 up

12-14 August 2003 Access Navigator - Release 1.8