Carrier Access Access Navigator Login with User Name Required, Login with No Password Required

CLI Language Reference

Login with User Name Required

Login with User Name Required

If there is at least one user defined, the startup will include a “Login:” message similar to the following.

Carrier Access Corporation Access Navigator

08:30:45 11/30/1998

Login:

To login, type your user name and press the Enter or Return key. User names are not case sensitive. In the following example, the user name is smith.

Carrier Access Corporation Access Navigator

08:30:45 11/30/1998

Login: smith

If the user name is incorrect, the “Login:” message will be repeated.

Login with No Password Required

If no password is required, the command prompt will appear immediately after entering your user name, as shown below.

Carrier Access Corporation Access Navigator

08:30:45 11/30/1998

Login: smith

SystemID>

Login with Password Required

When a password is required, a “Password:” message will appear as shown below. This means that you must enter your password and press the Enter or Return key. As you type the password, the CLI will display asterisks. Passwords are case sensitive, so upper and lower case letters are different.

Carrier Access Corporation Access Navigator

08:30:45 11/30/1998

Login: smith

Password:******

If the password is incorrect, the “Login:” message will be repeated.

Access Navigator - Release 1.8 August 2003 18-19