Carrier Access Access Navigator user manual Test DS1 Circuits

Provision GR-303 Service

Test DS1 Circuits

Test DS1 Circuits

NOTE: The Access Navigator supports the following T1.403 loop tests:

•Responds to ESF bit patterned loop requests (when loopdetect is on)

•Generates ESF bit patterned loop requests

•Generates SF CSU inband loopcodes

NOTE: The Access Navigator provides line and payload loopback commands for troubleshooting line problems. See Diagnostics & Troubleshooting on page 15-1.

NOTE: If the Access Navigator is connected to the local digital switch, you can use the status eoc and status tmc commands to determine the link status. "Up" status indicates the LAPD communications link with the switch is established and healthy.

Follow standard practices to test groom DS1 circuits.

10-20 August 2003 Access Navigator - Release 1.8