Carrier Access Access Navigator user manual Vertical Wall Mount, Precautions

Physical Installation

Vertical Wall Mount

Vertical Wall Mount

NOTE: The following procedure assumes that the Access Navigator and other compo- nents will be mounted on a plywood sheet before attaching plywood to wall. Pre-mounting equipment at the carrier facility will speed up installation at the customer site.

Installation Summary

￿Precautions ... 5-15

￿Tools and Materials ... 5-16

￿Ensure Adequate Clearance ... 5-16

￿Prepare Plywood ... 5-16

￿Attach Mounting Brackets to Access Navigator ... 5-16

￿Attach Mounting Brackets to Access Navigator ... 5-16

￿Attach Access Navigator to Plywood ... 5-17

Precautions

CAUTION! WALL MOUNTING IS APPROVED ONLY FOR CUSTOMER PREMISES.

CAUTION! ACCESS NAVIGATOR REQUIRES FREE AIR SPACE ON TOP, BOTTOM, AND ENDS OF CHASSIS FOR AIR CIRCULATION. INSUFFICIENT VENTILATION MAY CAUSE SERVICE INTERRUPTIONS, RESULTING FROM EQUIPMENT OVERHEATING AND SHUTTING DOWN. DO NOT ALLOW CABLES AND OTHER COMPONENTS TO OBSTRUCT AIR CIRCULATION. THE ACCESS NAVIGATOR INCLUDES TIE POINTS FOR ATTACHING WIRE TIES TO SECURE CABLES TO REAR PANEL WITHOUT OBSTRUCTING AIR FLOW (SEE

FIGURE 5-11).

WARNING! IF ACCESS NAVIGATOR IS MOUNTED ON PLYWOOD, DO NOT USE A HAMMER TO ATTACH PLYWOOD TO WALL BECAUSE THE IMPACT SHOCK MAY DAMAGE THE ACCESS NAVIGATOR AND OTHER COMPONENTS MOUNTED ON THE PLYWOOD. A POWER DRILL AND SCREWDRIVER IS RECOMMENDED TO AVOID DAMAGE.

Access Navigator - Release 1.8 August 2003 5-15