Carrier Access Access Navigator user manual Set CRV Idle, Set Date, Set DS0 CRV

CLI Language Reference

CLI Command List

Set CRV Idle

Purpose: Clears a permanent off-hook call state (see Status TMC on page 18-173) by setting it to the normal idle state. A call can be active, idle, or permanent. You can check the current call state with the status crv command (see Status CRV on page 18-157). An active call can not be set to idle.

NOTE: In the following command, there can be up to 24 CRVs in a range, such as 1-24 or 110-134. The CRVs do not have to be on the same DS1.

Security: Level 2 (operator)

Syntax: set crv <value> idle

Field

value

Description

Call Reference Value, 1 to 768, or a range of values such as 5-8. Maximum range is 24 CRVs.

Example: set crv 10 idle

Set Date

Purpose: Set Access Navigator system clock date.

Security: Level 2 (operator)

Syntax: set date <mm/dd/yyyy>

Field	Description
mm/dd/yyyy	Date format is month/day/year with slashes to separate the digits,
	as in 01/30/1999. The year must be four digits and greater than
	1990.

Example: set date 1/30/1999

Set DS0 CRV

CAUTION! SERVICE DISRUPTIONS CAN OCCUR IF YOU ASSIGN A CRV THAT IS ALREADY IN USE BY ANOTHER SUBSCRIBER. ALWAYS VERIFY CRVS BEFORE MAKING CHANGES.

NOTE: A CRV with an active call can not be moved or reassigned.

NOTE: To avoid duplication when setting CRV numbers, if another channel has the same CRV number, it will be set to CRV #0 (the value for unassigned CRVs).

Access Navigator - Release 1.8 August 2003 18-97