Carrier Access Access Navigator user manual Set Remote T1Drop PRM, Set Remote V35 ClockInv

CLI Language Reference

CLI Command List

Set Remote T1Drop PRM

Purpose: Sets the T1 Drop performance message type to either ANSI T1.403 one-second Performance Report Messages (PRMs) or AT&T 54016 Maintenance Messages over the 4 Kbps ESF Facility Data Link (FDL).

Security: Level 2 (operator)

Syntax: set remote <n> t1drop prm <ansiatt>

Field

n

ansi

att

Description

DS1 number, 1 to 32.

Set to ANSI T1.403 performance report messages.

Set to AT&T 54016 maintenance messages.

Example: set remote 9 t1drop prm att

Set Remote V35 ClockInv

Purpose: Sets the Access Bank II V.35 interface transmit and receive clock polarity. The clock signals for each direction can be normal or inverted.

The Access Bank II provides a V.35 port for connection to a V.35 router. You can connect one or more DS0s to the V.35 port, using a fractional interface. If the router does not have automatic rate sensing, it will have to be programmed for the proper data rate. Use the show remote command to display the current settings stored in the Access Navigator’s data base.

Security: Level 2 (operator)

Syntax: set remote <n> v35 clkinv <rxtxrxtxnone>

Field	Description
n	DS1 number, 1 to 32.
rx	Invert receive clock only.
tx	Invert transmit clock only.
rxtx	Invert both receive and transmit clock.
none	No clock inversion.

Example: set remote 9 v35 clkinv none

18-124 August 2003 Access Navigator - Release 1.8