Carrier Access Access Navigator user manual Pots

CLI Language Reference

CLI Command List

Secondary	DS1 #29 channel 24
Channel:
Link Status:	Up
Mode:	Standby
	Total	POTS	ISDN
Active Calls:	-----	----	----
	206	0	0
Permanent Calls:	0	0	0
Peak Calls:	233	0	0
Terminating Calls:	104	0	0
Originating Calls:	102	0	0
Blocked Calls:	0

Item	Description
Primary	Primary TMC channel
Secondary	Primary TMC channel
Channel	Location of TMC, by DS1 and DS0 number.
Link Status	Up – indicates LAPD communications link with switch is
	established and healthy.
	Down – out of service.
	None – no link defined.
Mode	Active or Standby – One TMC is active and the other is in
	standby. If the active TMC fails, the switch will command the
	standby TMC to become active.
POTS	Number of Plain Old Telephone Service calls
ISDN	Number of Integrated Services Digital Network, Basic Rate
	Interface calls.
Active Calls	Number of currently active calls.
Permanent Calls	Number of calls currently set in a permanent off-hook state. This
	state will be cleared when an on-hook is observed for more than
	400 milliseconds.
Peak Calls	Maximum number of calls at one time.
Terminating Calls	Number of calls terminating on subscriber drops at current time.
Originating Calls	Number of calls originating from subscriber drops at current
	time.
Blocked Calls	Number of calls blocked by Access Navigator or switch. Switch
	may also refuse call if line configuration is not correct. Blocking
	can occur because:
	• Switch side DS0s are not available for call request.
	• Switch is not configured for call request from CRV.

18-174 August 2003 Access Navigator - Release 1.8