Carrier Access Access Navigator user manual Status CRV, Syntax status crv range

CLI Language Reference

CLI Command List

Status CRV

Purpose: Displays the status of the specified CRV number.

NOTE: In the following command, there can be up to 24 CRVs in a range, such as 1-24 or 110-134. The CRVs do not have to be on the same DS1.

Security: Level 3 (monitor)

Syntax: status crv <range>

Field

range

Description

Call Reference Value, 1 to 768, or a range of values such as 15- 18. Maximum range is 24 CRVs.

Example: status crv 10

Example: status crv 5-8

Message:

CRV	Status	Call Status
---	------	-----------
4	Not Assigned	Active
5	In Service
6	In Service	Active
7	In Service	Idle
8	In Service	Permanent
9	Assigned to ISDN
Description:
	Item	Description
	CRV	Call reference value, 1 to 768
	Status	The following states may occur:
		Not Assigned
		Not Available
		Assigned to ISDN
		In Service
		User set Out of Service
		Switch set Out of Service
		Card not Installed
		Facility failure
		DS1 Out of Service
	Call Status	The following states may occur when CRV is In Service:
		Active – Call in progress (off hook)
		Idle – Line available (on hook)
		Permanent – Line not available because of permanent off-hook
		state

Access Navigator - Release 1.8 August 2003 18-157