Carrier Access Access Navigator user manual Show Snmp, Syntax show snmp

CLI Language Reference

CLI Command List

Description:

Item

CH

Span

Description

Channel numbers in two rows, 1-12 and 13-24.

Interface name (span number).

T1#1(1) – T1 interface #1, with up to 24 channels. T1#2(2) – T1 interface #2, with up to 24 channels. SDSL(2) – SDSL interface, with up to 16 channels. FX#1(3) – FX card #1, with up to 12 channels.

FX#2(4) – FX card #2, with up to 12 channels. V35(5) – V.35 interface, with up to 24 channels. RS232(6) – RS-232 port, with one channel.

Show SNMP

Purpose: Displays the current snmp settings. To protect management access, the Community names can only be viewed and changed by CLI commands.

Simple Network Management Protocol (SNMP) enables network operations centers (NOCs) to monitor and manage network elements across an internetwork. The Access Navigator supports SNMP through its Ethernet port. Various set snmp commands are used to set up the Access Navigator for access by the carrier’s TCP/IP management network.

Security: Level 3 (monitor)

Syntax: show snmp

Message:

System Name:	Acme Corp AN#2
System Location:	DNVRCO1A201
System Contact:	Site Manager
GET Community:	public
SET Community:	public
TRAP Community:	public
NMS #1:	192.168.0.65
NMS #2:
NMS #3:

Description: System name, location, contact, and communities are text strings. Up to three Network Management System (NMS) stations can receive trap messages at their IP address.

Access Navigator - Release 1.8 August 2003 18-153