Carrier Access Access Navigator user manual 13-14

Provision Remote Adit 600 via IP DS0

Provision Groom DS1s to Adit Router

NOTE: When loop code detection is turned on, the Access Navigator will respond to T1.403 ESF bit patterned loop requests. Loop detection is normally turned off for DS1 drops.

9.Set drop DS1 loop request code detection off with the following command: set ds1 <n> loopdetect off

Example: set ds1 32 loopdetect off 10. Set DS1 identification

set ds1 <n> id <"name"> Example: set ds1 32 id "DS1#32"

11.Set DS1 in service set ds1 <n> up

Example: set ds1 32 up

13-14 August 2003 Access Navigator - Release 1.8