Carrier Access Access Navigator Show Autoexit, Show Clock, Show Connect, Syntax show autoexit

CLI Language Reference

CLI Command List

Show Autoexit

Purpose: Displays the current setting for the autoexit timeout.

Security: Level 3 (monitor)

Syntax: show autoexit

Message:

CLI session timeout = 15 minutes.

Show Clock

Purpose: Displays the current settings for the primary and secondary master transmit clock source.

Security: Level 3 (monitor)

Syntax: show clock

Message:

Primary Master Transmit Clock Source: DS1 12

Secondary Master Transmit Clock Source: INTERNAL

Description:

Item	Description
Clock Source	Clock source can be a DS1 line receiver, internal Stratum clock
	oscillator, or external Building Integrated Timing Supply
	(BITS).

Show Connect

Purpose: Displays static DS0 connections in the specified DS1. This display will list the current static DS0 crossconnect settings and dynamic GR-303 voice and ISDN BRI connections. If a DS0 is part of a fractional interface, the interface name will be shown.

For GR-303 service, the switch assigns GR-303 voice connections as needed, between switch DS1s and drop DS1s. ISDN BRI using 4:1 TDM mode transport has the D signaling channel statically connected to a switch DS0, while the switch only sets up B1 and B2 bearer DS0s as needed between switch DS1s and drop DS1s.

NOTE: ISDN BRI connections using the GR-303 4:1 TDM transport mode will appear as type GR-303.

Access Navigator - Release 1.8 August 2003 18-135