Carrier Access Access Navigator user manual Active

CLI Language Reference

CLI Command List

Field	Description
tftp	Download software via Internet TFTP.
	The Controller update software file must be located on a TFTP
	file server accessible by both the Telnet management terminal
	and the Access Navigator. Trivial File Transfer Protocol (TFTP)
	allows a file to be sent over a network by specifying the server IP
	address and file name or path name. Using an RS-232 or Telnet
	management session, the operator sends a load tftp command
	to the Access Navigator, specifying the location of the TFTP
	server and update file. TFTP server capabilities, including time-
	out settings, must match the bandwidth of the network being
	used. Depending on the file size and network speed, the file
	transfer may take several minutes.
active	Upgrade active Controller card.
standby	Upgrade standard Controller card.
ipaddr	IP address where software update file is stored. IP address has
	format xxx.xxx.xxx.xxx, where xxx is a number from 0 to 255.
file	File name including path used to locate the update software.
	Carrier Access software file names are shortened for
	compatibility with PC and UNIX systems. For example, a
	Carrier Access part number for GR-303 software such as 019-
	0050 version 1.72 would be shortened to 0050172.303.
	Similarly, DCS software 019-0051 version 1.72 would be
	shortened to 00510106.DCS. Software providing different
	feature options will have different part numbers.

After sending the load command, the CLI will respond with a series of status messages.

Message:

Transmission complete.

Programming flash . . .

Software update succeeded.

18-36 August 2003 Access Navigator - Release 1.8