Carrier Access Access Navigator user manual Status Isdn CRV, Syntax status isdn crv range

CLI Language Reference

CLI Command List

Status ISDN CRV

Purpose: Displays a message listing the status of the specified ISDN BRI channels. To display the ISDN BRI channels, you must enter a CRV or range of CRVs.

NOTE: The status isdn crv command only applies to ISDN BRI channels transported in the GR-303 4:1 TDM mode. Other ISDN BRI channels transported using the 3DS0 mode are set up as digital crossconnections that can be examined using the status ds0 command.

Security: Level 3 (monitor)

Syntax: status isdn crv <range>

Field

range

Description

Call Reference Value, 1 to 768, or a range of values such as 15- 18. Maximum range is 24 CRVs.

Example: status isdn crv 6

Example: status isdn crv 1-4

Message:

CRV	Chan	Status	Call Status
---	----	------	-----------
1	B1	In Service	Active
1	B2	In Service	Active
1	D	In Service	n.a.
2	B1	In Service	Idle
2	B2	In Service	Idle
2	D	In Service	n.a.
3	B1	In Service	Idle
3	B2	In Service	Idle
3	D	In Service	n.a.
4	B1	User set Out of Service
4	B2	User set Out of Service
4	D	User set Out of Service

Description:

Item

CRV

Chan

Description

Call Reference Value, 1 to 768

B1 – Bearer channel 1

B2 – Bearer channel 2

D – Signaling channel

Access Navigator - Release 1.8 August 2003 18-171